Starting at
$2,235.00
PRICES DO NOT INCLUDE CRATING AND FREIGHT.
SEE SIZES BELOW
Product Information
Enjoy the charm and elegance of this intricately carved stone mantel with the function of today.
This Stone Mantle is made of a mixture of selected US aggregates, reinforcement fibers and special additives. Sealed with a clear coat for easy care. These special materials offer durability, strength and visual appeal.
Stone mantle texture is slightly distressed. **Includes Hearth**
Dimensions
Dimensions
Installation
Assembly & Installation
|
|
A 2 ¨C Legs
B 1 - Mantel Shelf
C 2 side filler panels
D 1 top filler panel
E 3 piece
hearth (for Chateau and
President Series mantels only)
|
|
|
|
|
|
|
Step 1- Hearth Installation |
Center the hearth at the firebox opening and set tight to the wall. Thehearth should be level to ensure there are no spaces between the floorand under side ofthe hearth. Once centered apply construction adhesive (we recommend PL Premium) to the under side of the hearth.
|
|
|
Step 2 - Filler panel installation |
Cut the filler panels to the required size. We recommend using an small angle grinder with concrete blade. Apply construction adhesive to the back of the filler panels. Place the mantel legs to determine the correct measurements. Do not screw the legs into the wall until the filler panels have been installed. |
|
|
|
Step 3 ¨C Leg Installation |
Determine and mark the position of the legs. Mark sure the legs are level and identical distance on either side of the firebox opening. Use shims to level the mantel legs if required. Apply construction adhesive to the back of the legs and screw the legs to the wall using the metal wall ties attached to the top of the legs . |
|
|
Step 4 - Install the mantel shelf |
Mantel shelves are cast with a cavity in the back to accommodate wood blocking for support. Locate the wood blocking position by off setting the material thickness at the top of the shelf from a pencil line indicating the top edge of the mantel shelf when set on the mantel legs. Screw wood blocking with wood screws into the wall studs for greatest support. Apply adhesive to the back surfaces of the mantel shelf, top of leg and the top of the wood blocking to ensure continuous contact with the wall. Use bracing to secure the mantel shelf tight to the wall until the adhesive sets. |
|
|
|
Step 5 -Finishing |
Fill any gaps around the mantel with the cement provided. NOTE the cement provided dries in less then 20 minutes. Add colored water and apply promptly. Color the water by mixing it with any dark color COLD tea.
|
*mix only a small amount of cement as needed as it dries in 20 min
Stone Mantels are factory treated with a clear water-based sealer and do not require additional surface treatment |
|
Step 6 -Cleaning |
Clean mantel with a damp cloth as needed. Do Not wet the mantel. Water marks may appear if the cloth is wet. |
|
|
|
Order & Delivery
Ordering & Delivery
Add to Cart and order online w/ credit or debit card.
We use PayPal to process orders but you do not need a PayPal account during checkout.
PRICES DO NOT INCLUDE CRATING AND FREIGHT. PLEASE CONTACT US FOR SHIPPING.
Louis XIII Chateau